Spray Foam Insulation in Selma - Same-Day Service, Done Right the First Time

Fast, Reliable Spray Foam Insulation Across Selma

Spray foam insulation in Selma, TX typically runs $1.80-$3.20 per board foot installed, with most whole-attic retrofits falling between $2,400 and $5,800 depending on whether open-cell or closed-cell foam is used. We’re usually on-site in Selma within 24-48 hours of your call, and every job starts with a written price before any work begins. Dispatch and scheduling are coordinated from our San Antonio office, but our crews serve Selma locally and know the area’s housing stock inside out. Call (830) 549-6646 for a free estimate.

Call (830) 549-6646

Why Topside Attic Insulation Seguin Is Selma’s Preferred Spray Foam Insulation Company

We’ve sealed and insulated more than 9,000 homes since 2016, and a significant concentration of that work has been right here in Selma. The reason is straightforward: this city’s housing stock is almost entirely production-built tract homes from the 2000s-2010s boom, so the entire city is essentially the same-age, same-deficiency retrofit market. Nearly every attic in Selma is sitting at the same settled-in R-30, which means we rarely see a “mixed” attic; we see the exact same failure repeated block after block. That repetition has made us fast and precise. We know where the builder cut corners before we pull the attic hatch.

Selma homeowners have left us strong reviews specifically citing our documentation - the before-and-after blower-door numbers, the photo record, the written scope they received before anyone started. Under The Haven Standard, every job closes with a Documented Photo Record and, on applicable jobs, before-and-after blower-door readings so you can verify the air-sealing result in a single figure. Our 365-Day Done Right Promise applies to all completed work, and a live person answers calls 24/7 - no voicemail loops, no callback windows measured in business days.

Our Spray Foam Insulation Services in Selma

Open-Cell Spray Foam in Selma

Open-cell spray foam runs $1.80-$2.40 per board foot in Selma and is our most common specification for attic roof decks and garage ceilings in the city’s slab-on-grade tract homes. The foam expands to roughly 100 times its liquid volume, filling irregular framing cavities tightly - critical in Selma’s production builds where trusses were set on 24-inch centers with minimal regard for continuous insulation barriers. Open-cell is vapor-permeable, which matters in Selma’s humid subtropical climate where attic moisture management is as important as thermal performance. We specify open-cell for roof deck applications where we need the assembly to dry to the interior.

Closed-Cell Spray Foam in Selma

Closed-cell spray foam runs $2.60-$3.20 per board foot locally and delivers R-6.5 per inch with a vapor barrier built in. We use it in Selma for rim joist applications, crawl space perimeter walls where present, and any conditioned space that needs maximum R-value in minimal thickness. The 2021 freeze exposed how little cold-side performance Selma’s code-minimum installs provide, and closed-cell at rim joists has become a standard upgrade for homeowners who want to see their HVAC system cycle normally during the next severe winter event. The material is rigid and adds structural racking strength - useful in garage ceiling applications where the ceiling drywall shows stress cracking from thermal movement.

Rim Joist Spray Foam in Selma

Rim joist spray foam is the single most overlooked deficiency in Selma’s production-built homes. The rim joist - the band of framing where the floor system meets the foundation - was left completely bare on nearly every slab-on-grade build in the 2000s-2010s boom. In winter, this is where cold air pours in; in summer, it’s where 150°F+ attic air drops into the wall cavity. We dense-pack or spray foam rim joists on almost every Selma job, and the blower-door improvement is immediate and measurable. A typical Selma rim joist treatment runs $800-$1,400 and pays for itself in reduced HVAC runtime within two to three cooling seasons.

Garage Ceiling Spray Foam in Selma

Garage ceiling spray foam has become one of our most requested services in Selma, particularly for homes near the I-35/Loop 1604 interchange. The builder left the garage ceiling as an uninsulated thermal bridge in nearly every tract home here - just drywall nailed to truss bottom chords with open framing gaps at the top plates. We apply open-cell spray foam directly to the garage ceiling, typically 5.5 inches for an R-19 assembly, which stops the 150°F attic air from radiating down into the garage and the rooms above. The secondary benefit is sound attenuation. Highway noise from I-35 and Loop 1604 drops measurably after garage ceiling treatment, and homeowners who bought near the commercial corridor for convenience tell us this upgrade changed how they use their bonus rooms and bedrooms over the garage.

Before

After

Trusted Brands We Service in Selma

We source spray foam materials from Icynene, Demilec, and Owens Corning - no proprietary product lock-in, so we specify what performs best for your specific assembly rather than what a manufacturer requires us to move. Our Selma crews carry stock for common open-cell and closed-cell formulations, which means we don’t wait on material delivery to start your job. Every batch is documented with manufacturer lot numbers and applied density readings, included in your Documented Photo Record. If you have a preference based on prior research or a competing estimate, we’ll walk through the spec sheet with you - our Free Second Opinion on any written estimate applies to material selection too.

Common Spray Foam Insulation Problems We See in Selma Homes

• Settled builder-grade fiberglass: Selma’s blown fiberglass was installed at code-minimum R-30 in the 2000s-2010s boom, and 15-25 years of settling and compression has dropped effective R-value well below that mark - especially in the back corners of slab-on-grade tract attics where airflow is weakest and the material has compacted to 4 inches or less.
• Unsealed garage ceilings and rim joists: The production builders left these areas completely bare on nearly every Selma home, creating direct thermal bridges where 150°F+ attic air pours into the living space through open framing gaps and top plates - the homeowner feels it as a hot bedroom over the garage or cold floors at exterior walls.
• HVAC misdiagnosis masking insulation deficiency: Because Selma’s cooling season spans roughly seven months, underinsulated attics force air conditioning systems to run near-continuously, and homeowners burn through $8,000-$12,000 HVAC replacements before anyone checks the attic - we see this pattern weekly in Selma’s 2005-2015 vintage homes.
• Highway noise penetration at uninsulated wall and ceiling assemblies: Homes near the I-35/Loop 1604 interchange deal with significant traffic noise, and the uninsulated garage ceilings and exterior walls that are standard in Selma’s production builds do almost nothing to attenuate it - spray foam adds both thermal and acoustic performance.

Pricing for Spray Foam Insulation in Selma, TX

We Also Serve Cities Near Selma

Our crews work throughout the I-35 corridor, including Selma and neighboring Seguin, New Braunfels, Cibolo, and Schertz. If you’re just outside Selma city limits or in a developing subdivision near the county line, we likely already service your area - call to confirm. Our Spray Foam Insulation team coordinates dispatch from San Antonio to keep response times tight across the corridor.

FAQs - Spray Foam Insulation in Selma